Magnizon - Get Power Systems around UAE and UK

overview

Magnizon’s HG series 6KVA /48V DC operated Smart DC-to-AC inverter with auto line-to-battery transfer and integrated Battery charge, serving as an extended run UPS, a standalone power source or an automotive inverter. HG series Smart inverter supplies power from AC power and DC source. When AC cable is connected to a wall socket, utility power goes to connected equipment(s) and/or charges the battery set via charging system. In battery mode, Smart inverter automatically converts battery energy into AC power for backing up the connected devices. Large LCD displays real time information along with operational schemes, and can also display error codes for easy repair and maintenance. Reliable transformer less IGBT based design and frequency controlled pure sine wave output power, very much compatible to all domestic loads: refrigerators, TV’s, Computers, and power tool and battery chargers. Smart micro controller based 3-stage built in charging system properly charge and maintain battery bank.

Images Available

key benefits, specs and more...

Key Features

48V DC or 220/230/240V AC input; 220/230/240V, 50 /60Hz Pure sine ware output
6000VA continuous output with double boost capacity
Microprocessor controlled Smart volume design
Built in 10~35A Smart Utility based battery charger
Automatic line-to-battery switchover
High efficient DC-to-AC conversion, minimizing energy loss
Rack design & wall-mounted design for flexible installation
Intelligent 3-stage charger control for efficient charging and preventing overcharge of battery
Auto restart while AC recovery
User-friendly LCD+LED indications
Multiple protection: low battery alarm, low battery shutdown, over
charged protection, overload protection, over temperature protection, short circuit protection
With the environmental temperature control charge management
Quiet, high efficiency operation, high surge capacity and low idle current
CE Safety
Compatible to mains voltage or generator power
Auto restart while AC is recovering
Overload, over temperature and battery deep discharge protection

Application

Versatile inverter/charger with pure sine wave system with seamless transfer switching serves as an automotive inverter for RVs, trucks, standalone alternative power source with high end back up times with various battery technologies (VRLA, GEL, Deep cycle, Ni-Cd and many more)
Off-grid and On-grid applications using external MPPT smart controllers
Home and small office applications
Remote closets and small computer room applications.
Petrochemical application
Critical applications where ever higher reliability is needed
SMB requirements
Remote closets and small computer room applications.

Specification

Model	HG6048SW-LCD
Rated Power	6000VA
INPUT AC
Nominal Input Voltage	220/230/240V AC
Low Loss Voltage	170V AC +/- 7V (UPS mode)
Low Loss Voltage	90V AC +/- 7V (Appliance mode)
Low loss return Voltage	180V AC +/- 7V (UPS mode)
Low loss return Voltage	100V AC +/- 7V (Appliance mode)
High loss Voltage	280VAC +/- 7V
High loss Return Voltage	270VAC +/- 7V
Max AC input voltage	300V AC
Frequency Range	50Hz/60Hz (auto sensing)
Low loss frequency	40+/-1Hz
Low loss return frequency	42+/-1Hz
High loss frequency	65+/-1Hz
High loss return frequency	63+/-1Hz
Efficiency	>97%
OUTPUT
AC Voltage Regulation	230V AC +/- 5%
Rated Output Power	6KVA/4.8KW
Output Voltage Waveform	Pure Sine wave
Output Frequency	50Hz/60Hz (auto sensing)
Surge Power	6000VA
Efficiency	95-97%
Over Load protection	5sec @>150% load; 10sec@110~150% load
Nominal DC input Voltage	48V DC
Cold Start Voltage	46.0V DC
Low DC Warning Voltage
@load < 20%	44.0V DC
@ 20% < load < 50%	42.8V DC
@ load > 50%	40.4V DC
Low DC Warning Return Voltage
@load < 20%	46.0V DC
@ 20% < load < 50%	44.8V DC
@ load > 50%	42.4V DC
Low DC Cut-off Voltage
@load < 20%	42.0V DC
@ 20% < load < 50%	40.8V DC
@ load > 50%	38.4V DC
High DC Recovery Voltage	58V DC
High DC Cut-off Voltage	62V DC
No Load Power Consumption	<20W
Saving Mode Power Consumption	<10W
Transfer Time	6-10mSec
Efficiency	90~93%
Charge Mode Specs (AC charger)
Battery Voltage	48V DC
Floating Charge Voltage	54V DC
Overcharge Protection	62V DC
Maximum Charge Current	35Amp
Bulk Charging Voltage (Flooded Battery)	58.4V DC
Bulk Charging Voltage (AGM/GEL battery)	56.4V DC
Charging Algorithm	3-Stage (CC-CV-Floating)
Display Indicators
AC/DC mode	Displays output power, Output Voltage etc
Battery Mode	Yes. Battery symbol flickers every one sec
Battery	Displays Battery charge status
Fault	Displays fault codes (refer the service manual)
Audible Alarm
Low Battery at Battery Mode	Sounding every 2 seconds
Over Load	Sounding every 0.5seconds
Faults	Continuous sounding
Protection
Battery deep discharge Protection	Yes
Battery Over charge protection	Yes
Inverter Over load protection	Yes
Over temperature protection	Yes
General Specs
Dimension (WxHxD-mm)	430350105mm
Net Weight (kgs)	8.5kgs
Humidity	5% to 95% Relative Humidity (non-condensing)
Operating Temperature	0degC to 40deg C
Storage Temperature	-15degC to 50degC
Cooling	Forced air, variable speed fan
Noise Level	less than 60dB
Quality/Safety standards	ISO9001:2015/ISO14001:2015
Safety	EMC/CE/ROHS
Certification/Confirmity
Disturbance at Mains Terminals	EN61000-6-3:2007+ A1: 2011+ AC:2012
Radiated Disturbance	EN61000-6-3:2007+ A1: 2011+ AC:2012
Harmonic Current Emission	EN61000-3-12: 2011
Voltage fluctuations & flickering	EN61000-3-11: 2000
Electrostatic Discharge (ESD)	IEC 6100-4-2:2008
Radio-frequency & continuous radiated disturbances	IEC 6100-4-3:2006 + A1:2007 + A2:2010
EFT/B Immunity	IEC 6100-4-4:2012
Surge immunity	IEC 6100-4-5:2014
Conducted RF immunity	IEC 6100-4-6:2013
Power frequency magnetic field	IEC 6100-4-8:2009
Voltage DIP, >95% reduction	IEC 6100-4-11:2004
Voltage DIP, >30% reduction	IEC 6100-4-11:2004
Voltage Interruption	IEC 6100-4-11:2004