Magnizon - Get Power Systems around UAE and UK

overview

Magnizon SVD-007K3 solar pump inverter, efficiently drives the pump motors by advanced maximum Power Point Tracking (MPPT) technology. Magnizon solar inverters support solar panel input, and AC main power or generator input. It can work 24hours with enough power support. 100% compliance with CE safety/EN/IEC 60068-2-27. Compatible with all kinds of motors & pumps including asynchronous & synchronous, submersible and surface mount.

Images Available

key benefits, specs and more...

Key Features

With no water alarm, timing to restart functions. When the pool has no water, the will stop, and then it will restart after interval set or water level raises to safe level.
When the pool is full, the solar inverter automatically stops, and it will show it in solar inverter`s panel.
Reliable: Solar inverter power supply are seldom used in the moving parts; the work is reliable
Safety: No other public nuisance. Don't have any solid, liquid and gas harmful substances, absolutely environmental protection.
Easy installation and maintenance, suitable for unattended or automatic running needs, etc
Good compatibility, Solar power generation can be used with other energy, also can according to the need to make the solar system easily expanded
Input voltage: DC 100V~310V (1-ph pumps) & DC 100V~600V (3-Ph pumps)
Input frequency range： 0～400Hz
Control mode： V/F control mode
Carrier frequency setting： 1kHz～15kHz.
Input frequency resolution： digital setting ：0.01Hz；analogue setting：Max frequency×0.1%
Starting torque： 0.5Hz/150%
Overload capacity：150% Rated current-60s；180% Rated current-10s
Torque boost :0.1%～50.0%
V/F curve: liner type； multipoint type
JOG control： JOG frequency range： 0.00Hz～50.00Hz；JOG acceleration and deceleration time 0.0s～6500.0s
PLC Multi-speed running: By built-in PLC
Built-in PID： Easy to realize process control closed loop control system
Automatic voltage regulation(AVR): When voltage change, it can automatically maintain constant output voltage
Over voltage and over current loss of speed control: During the inverter running, the current automatic voltage limit, to prevent frequent trip through the pressure
Communication methods: RS-485

Application

Existing AC motor based systems can be used: Conventional AC induction motors are generally used for water pumping system, so with this advancement in technology there is no need to replace the existing pump/motor/pipes/cables. Simply user can add Solar Panel & controller to run existing AC motor during day time and at night Grid power can be used (dual input systems).

Specification

Standard Function
Maximum frequency		Vector control: 0–650 Hz
		V/F control: 0–3200 Hz
Carrier frequency		0.5–16 kHz, carrier frequency is automatically adjusted based on the load features.
Frequency resolution		Digital setting: 0.01 Hz
		Analog setting: maximum frequency x 0.025%
		Sensor less flux vector control (SFVC)
		Closed-loop vector control (CLVC)
Control mode		Voltage/Frequency (V/F) control
Startup torque		G type: 0.5 Hz/150% (SFVC); 0 Hz/180% (CLVC)
		P type: 0.5 Hz/100%
Speed range		1:100 (SFVC), 1:1000 (CLVC)
Speed stability accuracy		± 0.5% (SFVC), ± 0.02% (CLVC)
Torque control accuracy		± 5% (CLVC)
Overload capacity		G type: 60s for 150% of the rated current, 3s for 180% of the rated current
		P type: 60s for 120% of the rated current, 3s for 150% of the rated current
Torque boost		Fixed boost
		Customized boost 0.1%–30.0%
V/F curve		Straight-line V/F curve
		Multi-point V/F curve
		N-power V/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power, square)
V/F separation		Two types: complete separation; half separation
		Straight-line ramp
Ramp mode		S-curve ramp
		Four groups of acceleration/deceleration time with the range of 0.0–6500.0s
DC braking		DC braking frequency: 0.00 Hz to maximum frequency
		Braking time: 0.0–36.0s
		Braking action current value: 0.0%–100.0%
JOG control		JOG frequency range: 0.00–50.00 Hz
		JOG acceleration/deceleration time: 0.0–6500.0s
Onboard multiple preset speeds		Support up to 16 speeds via the simple PLC function or combination of DI terminal.
Onboard PID		Embedded programmable PID controller to support closed loop control
Auto voltage regulation (AVR)		It can keep constant output voltage automatically when the mains voltage changes.
Over voltage/current stall control		Automatic voltage and current regulation to avoid frequently tripping over voltage/current protection
Torque limit and control		Automatic torque control to avoid frequently tripping over voltage/current protection
		Torque control can be implemented in the CLVC mode.
Rated AC Input Voltage Range		Rated Voltage -15%~+15%
Rated AC Frequency		50Hz/60Hz+/-5%
Rated DC input voltage Range		220/230V Model: 180~400Vdc 380V/440V Model: 350~800Vdc
Enhanced Function
High performance		high-performance current vector control technology.
Dynamic MPPT Function		Automatic control the output power to track the maximum power point of the solar panel
Power dip ride through		Control to maintain running upon short interval power blackout or power dip .
Rapid current limit		It helps to avoid frequent overcurrent faults of the AC drive.
Virtual I/Os		Five groups of virtual DI/Dos can realize simple logic control.
Timing control		Time range: 0.0–6500.0 minutes
Multi-motor switchover		Four motors can be switched over via four groups of motor parameters.
Multiple communication protocols		Supports communication via Modbus-RTU, PROFIBUS- DP
Motor overheat protection		The optional I/O extension card enables AI3 to receive the motor temperature sensor
		input (PT100, PT1000) so as to realize motor overheat protection.
Protection type		Line supply overvoltage and under voltage safety circuits for drive
		Line supply phase loss safety function, for three phases supply for drive
		Motor phase breaks for drive
		Overcurrent between output phases and earth (on power up only) for drive
		Overheating protection for drive
		Short-circuit between motor phases for drive
		Thermal protection for motor
		Input phase breaks for drive
Dielectric strength		2410 V DC between earth and power terminals
		3400 V AC between control and power terminals
Insulation resistance		>= 500 mOhm at 500 V DC for 1 minute
Local signalling		1 LED (red) signal for drive voltage
		Four 7-segment display units signal for CANopen bus status
Time constant		5 ms for reference change
Frequency resolution		0.1...100 Hz for analog input
		0.1 Hz for display unit
Multiple encoder types		Supports various encoders such as differential encoder, open-collector encoder,
		resolver, UVW encoder, and SIN/ COS encoder.
Operational Parameters
Running command source		Operation panel
		Control terminals
		Serial communication port
Frequency source		Up to 10 frequency sources, such as digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting. various ways to switchover between sources
Auxiliary frequency source		Up to 10 auxiliary frequency sources. Support fine tuning of auxiliary frequency and frequency synthesis.
Input Control Terminal		5 digital input (DI) terminals, one supports up to 100 kHz high-speed pulse input
		2 analog input (AI) terminals, one supports 0–10 V voltage input and the other supports 0–10 V voltage input or 4–20 mA current input
		Expanding capacity: 5 DI , 1 AI supports -10–10 V voltage input and also supports PT100\PT1000
Output terminal		1 high-speed pulse OP terminal (oc ) supports 0–100 kHz square wave signal output
		1 digital output (DO) terminal 1 relay output terminal
		1 analog output (AO) terminal that supports 0–20 mA current output or 0–10 V voltage output
		Expanding capacity: 1 DO , 1 relay output , 1 AO supports 0–20 mA current or 0–10 V voltage output
Display & Operation on the Operation Panel
LED display		5 digit LED display ,with indicators shows system status & parameters
Key locking and function selection		locking the keys and define the function range of some keys so as to prevent mis operation.
Protection mode		Motor short-circuit detection at power-on, input/output phase loss protection, overcurrent protection, Overvoltage protection, under-voltage protection, overheat protection and overload protection
Optional parts		LCD operation panel, braking unit, I/O extension card 1, I/O extension card 2, user programmable card, RS485 communication card, PROFIBUS-DP communication card, differential input PG card, UVW differential input PG card, resolver PG card and OC input PG card
Environment
Installation location		Indoor use, avoid direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt.
Altitude		Up to 4000m , de-rated needed above 1000 m
Ambient temperature		-10°C to +50°C , de-rated needed above 40°C
Humidity		Less than 95%RH, without condensing
Vibration		Less than 5.9 m/s2 (0.6 g)
Storage temperature		-20°C to +60°C
IP level		IP20
Pollution degree		PD2
Power system		TN , TT
Warranty		2years
Electromagnetic Compatibility & IEC compliance
Electromagnetic Compatibility		1.2/50 µs - 8/20 µs surge immunity test - test level 3 conforming to IEC 61000-4-5:2014
		Electrical fast transient/burst immunity test - test level 4 conforming to IEC 61000-4-4:2012
		Electrostatic discharge immunity test - test level 3 conforming to IEC 61000-4-2:2009
		Radiated radio-frequency electromagnetic field immunity test - test level 3 conforming to IEC 61000-4-3:2006
IEC Standards		EN61800-5-1, EN61800-3:2004+A1:2012, EN55011:2016, EN61000-3-2:2014, EN61000-4-4:2012, EN61000-4-8:2010, EN61000-4-6:2014, IEC62253:2011; EN62253:2012
Quality Standards		ISO9001:2015, ISO14001, RoHs, CE
Voltages (V)	Rated Output Current (A)**		Gross Weight (kg.)	External Size (HWD) (mm)	Package Size (HWD) (mm)
3-Ph 380/400/415V +/-20% DC input 200-600V	13/17		4.8	280145179	352226278