Pure Sine wave Hybrid inverter with built in MPPT controller-500W to 3KW
Provide Pure Sine Wave power for all your alternative energy needs with the Magnizon POWER HSP series. HSP series Magnizon POWER inverter/charger with duel operational modes with built in MPPT solar charge controller minimizes the hassles of Solar installation especially in hybrid environments. Day time will be supported through solar panels and night time or rainy days will be with batteries and Utility power with intelligent automatic switching.

Features

  • 12V/24V/48V DC or 230V AC input; 230V, 50 Hz output (hardwired)
  • 500/1000/1500/2000/3000 watts continuous output with double boost capacity
  • Microprocessor controlled Smart volume design
  • Built in MPPT solar charge controller
  • Duel Operational Mode UPS/ Solar Inverter Mode
  • Robust design for Hybrid configuration Pure sine wave output
  • High Efficiency Using Line-Interactive Circuit Topology(Full Bridge Topology)
  • Quiet, high efficiency operation, high surge capacity and low idle current
  • CE Safety

General Specifications

Input Wave Form

Sine wave (Utility or Generator)

Nominal Voltage

230V AC

Low Voltage Trip

154V +/- 4%

Low Voltage Re engage

164V +/- 4%

High Voltage Trip

253V +/- 4%

High Voltage Re engage

243V +/- 4%

Max Input AC Voltage

270V

Nominal Input Frequency

50Hz or 60Hz (Auto detect)

Low frequency trip

47Hz for 50Hz, 57Hz for 60Hz

High frequency trip

55Hz for 50Hz, 65Hz for 60Hz

Output Wave form(bypass mode)

Same as Input

Overload protection

Circuit breaker

Short circuit protection

Circuit breaker

Transfer switch rating

40Amp

Efficiency on line transfer mode

95%

Line transfer time

10 mSec Typical

Bypass without Battery connected

Yes

Max bypass current

40Amp

Bypass Overload Current

45Amps/ Alarm

Inverter Specification / Output

Output Wave form

Pure Sine wave

Output continuous power in Watts

500/1000/1500/2000/3000W

Output continuous power in VA

500/1000/1500/2000/3000VA

Power Factor

1

Nominal Output Voltage RMS

230V AC (L-N)

Output Voltage regulation

10% RMS (+/-)

Output frequency

50Hz +/-0.3Hz or 60Hz+/-0.3Hz

Nominal Efficiency

>88%

Surge rating

1500

3000

4500

6000

9000

Short circuit protection

Yes, fault after 10sec

Inverter Specification / Input

Nominal Input Voltage Dc

12V

Minimum start voltage Dc

10V

Low battery Alarm

10.5V

Low battery trip

10V

High Voltage alarm

16V

Power Saver

Below 25Watts when enabled

Power Saver

Same switched On/Off remote

Input connection type

DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate

Charger Mode Specification

AC input Voltage Range

164-253V AC

Output Voltage (DC)

Depends on battery type

Battery Charge current

15Amp to 45Amp

Battery initial Voltage for start up

0-15.7V Dc for 12V Dc (*2 for 24V; *4 for 48)

Over charge protection shutdown

15.7V DC 12V Dc (*2 for 24V; *4 for 48)

Charger Curves (1-6 UPS mode)

Charger curves (4 stage constant current) battery type

4 Step digital controlled progressive charge

Float V (Multiply 2 for 24V Dc, 4 for 48V DC)

Position/Battery Type

Boost Voltage

Float Voltage

0 / Not Used

1 / Gel USA

14.00

13.70

2 / AGM.1

14.10

13.40

3 / AGM.2

14.60

13.70

4 / Sealed Lead acid

14.40

13.60

5 / Gel Euro

14.40

13.80

6 / Gel Euro

14.80

13.80

Charger Curves (7-9 Solar Inv Mode)

Switch Position

Low Battery trip

High Battery Trip

7

11V

14V

8

10.5V

13.5V

9

10V

13V

Remote control/RS232/USB

Yes. Optional

Physics

Size (in mm)

486.4x400x181.2

Weight

18Kg

20.8Kg

22.8Kg

24.5Kg

29.1Kg

Warranty

1 Year limited warranty Extendable up to 4 years

ISO 9001:2005

ISO 14000:2005

RoHs