Pure Sine wave inverter with Built in Charger with LCD- 8KW
Provide Pure Sine Wave power for all your alternative energy needs with the Magnizon POWER MPS-8048-LCD. This inverter/charger supplies 8000 watts of continuous 230V /50Hz AC power. Reliable large transformer design and frequency control powers very much compatible to all varieties of loads.


  • 48V DC or 230V AC input; 230V, 50 Hz output (hardwired)
  • 8KW continuous output, 24000 watts peak output
  • Microprocessor controlled Smart UPS & Solar operational mode
  • 4-Step Progressive Charging & 7-Battery Type Selector
  • Fully compatible for Solar/Wind solutions for Hybrid configuration
  • Pure sine wave output with LCD display
  • High Efficiency Using Line-Interactive Circuit Topology(Full Bridge Topology)
  • Quiet, high efficiency operation, high surge capacity and low idle current
  • CE Safety


  • Well designed for hybrid applications where solar/wind energy systems connected along with grid or generator sets without using any relay and control mechanism
  • Versatile inverter/charger with pure sine wave system with seamless transfer switching serves as an automotive inverter for RVs, trucks, standalone alternative power source with high end back up times with various battery technologies(VRLA, GEL, Deep cycle, Ni-Cd and many more)
  • Off-grid and On-grid applications
  • Telecom and ATM applications
  • Remote closets and small computer room applications

Model No


Nominal Power


Input Specification

Input Phase & Wave Form

Single Phase & Sine wave (Utility or Generator)

Nominal Voltage

220/230/240V AC

Input AC voltage Window

154-273C AC

Line Low Transfer

154V +/- 4%

Low Voltage Re engage

164V +/- 4%

High Voltage Trip

273V +/- 4%

High Voltage Re engage

263V +/- 4%

Max Input AC Voltage


Nominal Input Frequency

50Hz or 60Hz (Auto detect)

Low frequency trip


High frequency trip


Output Connection type

Hardwire via built in junction box with cover plate

Inverter Output Specification

Output Wave form & Phase

Pure Sine wave & Single Phase (Bypass mode sync to Input)

Power Factor


Nominal Output Voltage RMS

220/230/240V AC (L-N) (same as input on Bypass mode)

Output Voltage regulation

+/-10% rms (bypass mode sync to input)

Output frequency

50Hz +/-0.3Hz or 60Hz+/-0.3Hz

Nominal Efficiency


Output Connection type

Hardwire via built in junction box with cover plate

Surge rating/crest factor

3 times of rating

Output continuous power in Watts


Output continuous power in VA


Short circuit protection

Yes, fault after 10sec

DC Input Specification

Nominal Input Voltage Dc

48V DC

Minimum start voltage Dc

40V DC

Low battery Alarm

44V DC

Low battery trip

40V DC

High Voltage alarm

64V DC

Over Charge Voltage

62.8V DC

Max Charging Current

750A DC

DC Connection type

DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate

Transfer Efficiency

Transfer Time


Line Mode


Battery Model


Power Save

Available when the load is less than 75W


4-LED Status Display

Charge, Line, Inverter & fault

LCD Display

Input Voltage, Output Voltage, Frequency, Battery voltage, Load, Temperature, Charge current & Fault

Switch Selector

Saving Mode is On/Off when push the switch forward/backwards, keeping it horizontal is turning the inverter Off

Audible Alarm

Sounding when the heat-sink's temperature is over 105deg C and shutdown after 30 seconds


Low Battery, Over charging, Over temp & over load


RJ11/RS232 (optional)

Environmental Details

Operating Temp

0-40deg C


0-95% RH (non-condensing)

Audible Noise


Physical Details

Size (in mm)





2 Year limited warranty Extendable up to 4 years



ISO 9001:2005

ISO 14000:2005