Pure Sine wave inverter with Built in Charger with LCD- 6KW
Provide Pure Sine Wave power for all your alternative energy needs with the Magnizon POWER MPS-6048-LCD. This inverter/charger supplies 6000 watts of continuous 230V /50Hz AC power. Reliable large transformer design and frequency control powers very much compatible to all varieties of loads.

Features

  • 48V DC or 230V AC input; 230V, 50 Hz output (hardwired)
  • 6000 watts continuous output, 12000 watts peak output
  • Microprocessor controlled Smart UPS & Solar operational mode
  • 4-Step Progressive Charging & 7-Battery Type Selector
  • Fully compatible for Solar/Wind solutions for Hybrid configuration
  • Pure sine wave output with LCD display High Efficiency Using Line-Interactive Circuit Topology(Full Bridge Topology)
  • Quiet, high efficiency operation, high surge capacity and low idle current
  • CE Safety

Applications

  • Well designed for hybrid applications where solar/wind energy systems connected along with grid or generator sets without using any relay and control mechanism
  • Versatile inverter/charger with pure sine wave system with seamless transfer switching serves as an automotive inverter for RVs, trucks, standalone alternative power source with high end back up times with various battery technologies(VRLA, GEL, Deep cycle, Ni-Cd and many more)
  • Off-grid and On-grid applications
  • Telecom and ATM applications
  • Remote closets and small computer room applications

General Specification

Input Wave Form

Sine wave (Utility or Generator)

Nominal Voltage

230V AC

Low Voltage Trip

154V +/- 4%

Low Voltage Re engage

164V +/- 4%

High Voltage Trip

253V +/- 4%

High Voltage Re engage

243V +/- 4%

Max Input AC Voltage

270V

Nominal Input Frequency

50Hz or 60Hz (Auto detect)

Low frequency trip

47Hz for 50Hz, 57Hz for 60Hz

High frequency trip

55Hz for 50Hz, 65Hz for 60Hz

Output Wave form(bypass mode)

Same as Input

Overload protection

Circuit breaker

Short circuit protection

Circuit breaker

Transfer switch rating

40Amp

Efficiency on line transfer mode

95%

Line transfer time

10 m Sec Typical

Bypass without Battery connected

Yes

Max bypass current

40Amp

Bypass Overload Current

45Amps/ Alarm

Inverter Specification / Output

Output Wave form

Pure Sine wave

Output continuous power in Watts

6000

Output continuous power in VA

6000

Power Factor

1

Nominal Output Voltage RMS

230V AC (L-N)

Output Voltage regulation

+/-10% RMS

Output frequency

50Hz +/-0.3Hz or 60Hz+/-0.3Hz

Nominal Efficiency

>92%

Surge rating

18000

Short circuit protection

Yes, fault after 10sec

Inverter Specification / Input

Nominal Input Voltage Dc

48V

Minimum start voltage Dc

40V

Low battery Alarm

42V

Low battery trip

40V

High Voltage alarm

64V

Power Saver

Below 25Watts when enabled

Power Saver

Same switched On/Off remote

Input connection type

DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate

Charger Mode Specification

AC input Voltage Range

160-260V AC

Output Voltage (DC)

Depends on battery type

Battery Charge current

50Amp

Battery initial Voltage for start up

0-62.8V Dc

Over charge protection shutdown

62.8V DC

Charger curves (4 stage constant current) battery type

4 Step digital controlled progressive charge

Battery Type

Boost Voltage

Float Voltage

Gel USA

56.00

54.80

AGM.1

56.40

53,60

AGM.2

58.40

54.80

Sealed Lead acid

57.60

53.20

Gel Euro

57.60

55.20

Open Lead acid

59.40

53.20

Calcium

60.40

54.40

De-sulphation

62V for 4hrs

Remote control/RS232/USB

Yes. Optional

Size (in mm)

598x218x179

Weight

40kgs

Warranty

1 Year limited warranty Extendable up to 4 years

ISO 9001:2005

ISO 14000:2005

RoHs